行业新闻

原文
Air conditioning and electric thermostat valve Digital thermostat, widely used in central air-conditioning fan coil units, air handling units such as the new terminal equipment, temperature control air conditioning system. Air-conditioning thermostat by liquid crystal display panel, control box, electric actuators and valve components. Air-conditioning thermostat with large LCD display, through the air conditioning thermostat inside the NTC temperature sensor to detect room temperature. And real-time and compare the temperature set by the user, automatically adjust the air flow while regulating the flow of hot and cold water to keep the indoor temperature to save energy. Electric valve is designed with central air-conditioning in the fan coil, air handling units supporting new products, the driver and two body parts, drive driven by a synchronous motor, gear drive, with a screw to adjust the valve opening degree. Body part is the piston type structure. Electric valve with air-conditioning thermostat supporting the use of air-conditioning system to achieve hot and cold water flow control. Air-conditioning thermostat and electric valve new example: New Link Group, the newly developed two-way "float type valve" and "float-type air conditioner thermostat," and "proportional-integral control valve, thermostat." These new products to the room air conditioner thermostat water "through and off" approach, the reform of water supply with the temperature change directive "more with less" approach, so that the temperature difference maintained at 2 ℃.
原文来自：http://www.diandongfamen.org

是由上海日美阀门制造有限公司提供的阀门新闻，中文译文仅供参考，以下提供站内导航搜索：

中国电动阀门网电动阀门产品电动阀门知识电动阀门厂商电动阀门博客电动阀门行业新闻

译文：
数字温控器，广泛适用于中央空调风机盘管、新风机组等空调末端设备的温度控制系统。空调温控器是由液晶显示面板、控制盒、电动执行器和阀体组成。空调温控器采用大屏幕液晶显示，通过空调温控器内部的NTC温度传感器，检测室内温度。并实时地与用户所设定温度进行比较，自动调节风量同时调节冷热水的流量，保持室内恒温，以达到节能的目的。电动阀是专与中央空调中的风机盘管、新风机组配套的产品，由驱动器和阀体两部分组成，驱动器由一个同步电机驱动，齿轮传动，用丝杠来调节阀门的开启度。阀体部分采用活塞式结构。电动阀可与空调温控器配套使用，实现对空调系统中冷热水流量的控制。空调温控器与电动阀新品举例：新菱集团新开发的双向“浮点式调节阀”和“浮点式空调温控器”、以及“比例积分调节阀、温控器”。这些新产品把房间中央空调温控器供水的“通与断”方式，改革为随室温变化指令供水的“多与少”方式，从而使温度变化差保持在2℃以内。

更多新闻：